This equipment is specially used for determine the thermal shock resistance of ceramic tiles. Fully meets the requirements of GB/3810.9-2016 and ISO10545-9:2013 (method for determination of thermal shock resistance of ceramic tiles), as well as GB/T3298-2008( method for determination of thermal shock resistance of daily use ceramic ware).

Based on the water absorption rate of ceramic tiles being less than 10%, the immersion method is used, this tester is also suitable for testing of glass and other silicate products and refractory materials. Equipped with electric lifting and lowering device.

For ceramics with a water absorption rate greater than 10%, non immersion test method shall be adopted, which requires the aluminum plates and aluminum particles.

Technical parameters

Model	RSQ06	RSQ06-2(Automatic control of temperature and time, automatic control of test cycle, timing and other functions)
1. Maximum working temperature of furnace body	300 ℃;	300 ℃;
2. Average temperature zone size and temperature difference	300 × 300 × 300mm or 600 × 300 × 600mm, ± 5 ℃ (two specifications optional);	300 × 300 × 300mm or 600 × 300 × 600mm, ± 5 ℃ (two specifications optional);
3. Temperature control accuracy	± 5 ℃ (at 300 ℃);	± 5 ℃ (at 300 ℃);
4. Effective volume (basket size)	300 × 300 × 300mm or 600 × 300 × 600mm (two sizes optional);	300 × 300 × 300mm or 600 × 300 × 600mm (two sizes optional);
5. Heating up time of the cold furnace	60 minutes (from room temperature to 300 ℃);	60 minutes (from room temperature to 300 ℃);
6. Temperature rise time of cold material entering the furnace	5 minutes (300 ℃, material weight 7 kg);	5 minutes (300 ℃, material weight 7 kg);
7. Temperature control range of water tank	15-50 ℃;	15-50 ℃;
9. Temperature control accuracy	± 2 ℃;	± 2 ℃;
10. Water temperature unevenness	± 2 ℃;	± 2 ℃;
11. Temperature rise within 5 minutes of hot material entering water	± 4 ℃ (material temperature 300 ℃, 7 kg);	± 4 ℃ (material temperature 300 ℃, 7 kg);
12. Maximum power consumption of heating furnace	6kw;	7.5kw;
13. Maximum power consumption of water and electricity heater	4kw;	4kw;
14. Compressor power	2.2kw;	2.2kw;
15. Timer range	2.2kw;	2.2kw;
16. Instrument configuration	including one thermal shock tester host and one sample holder.	including one thermal shock tester host and one sample holder.
NOTES	For ceramics with a water absorption rate greater than 10%, non immersion testing requires the selection of aluminum plates and aluminum particles, and the cost will be calculated separately.

Have any question, Please enter the form below and click the submit button.

*

*

4 + 7 = ? Please enter the answer to the sum & Click Submit to verify your registration.