This atmosphere furnace is a specialized heat treating equipment, it’s widely used in laboratory for chemical analysis, physical measurement, sintering and dissolution of metals, ceramics, etc., as well as debinding, pre-firing and firing of electronic components, powder metallurgy, magnetic materials, quartz materials and many other materials.

The furnace body of the high temperature atmosphere furnace adopts a double-layer furnace shell structure, high-performance thermal insulation material, and is equipped with a cooling fan which can keep the surface temperature of the furnace body lower, and the energy saving is 60% compared with ordinary furnaces. The furnace door and furnace top are sealed with high-temperature silicone rubber, which can be pre-evacuated and can be fed with various inert gases.

 

Features

1. The furnace chamber adopts Japanese technology vacuum adsorption molding, and is made of high-quality alumina polycrystalline fiber inorganic material, which has good thermal insulation performance, durability, high tensile strength, no foreign balls, high purity, and energy saving effect is obviously better than other domestic fiber materials;
2. The entire furnace body adopts a double-layer liner structure with an air gap in the middle. Even if the furnace temperature reaches the highest, the surface of the furnace body can still be safely touched without a burning feeling.
3. The furnace is made of energy-saving materials, and the energy consumption of the whole machine is only 1/3 of the same traditional electric furnace.
4. The furnace body is equipped with output voltage and output current indicator, and the heating status of the furnace is clear at a glance.
5. Equipped with over-temperature alarm power-off function and leakage protection measures, the operation is safe and reliable.

 

Specifications

Model	QZL-1720
Furnace structure	Double-layer shell structure, equipped with a cold air system to automatically cool down the furnace shell temperature does not exceed 50 ℃
Furnace material	The high-quality high-purity alumina polycrystalline fiber curing furnace formed by Japanese technology vacuum adsorption has good thermal insulation performance, high reflectivity and balanced temperature field.
Maximum  temperature	1700℃
Continuous working temperature	≤1600℃
Heating rate	Recommended ≤10℃/min, the fastest heating rate is 20℃/min
Heating zone size	300*250*250mm (D*W*H)
Temperature control system	The temperature control system adopts artificial intelligence adjustment technology, with PID adjustment and self-tuning functions 1. Using PID mode to adjust temperature control, 30 sections of heating and cooling programs can be set 2. Temperature control accuracy ±1ºC 3. With over-temperature protection, broken couple protection 4. The instrument has the function of temperature self-tuning
Heating element	High temperature silicon molybdenum rod
Temperature measuring element	Type B double platinum rhodium thermocouple
Interface	The furnace is equipped with an inlet, outlet and vacuum ports, with a rotameter and a mechanical vacuum pressure gauge on the gas path
Sealing system	The furnace door and furnace top are sealed with high-temperature silicone rubber, and the furnace chamber has an air inlet and an air outlet that can pass gas and can be evacuated.
Working power	AC380V，50Hz
Rated power	8kw
Door-opening way	side door
Vacuum pump	Rotary vane pump DRV10 (2L/S) Ultimate vacuum degree: 500Pa
Standard configurations	1 set of crucible tongs, 1 set of high temperature gloves, 1 copy of the instruction manual, 1 copy of the warranty card

Have any question, Please enter the form below and click the submit button.

*

*

4 + 4 = ? Please enter the answer to the sum & Click Submit to verify your registration.