Model: DL-5G Standards: IEC60068-2-32, GB/T2324.8 Description This rolling drum testing machine is suitable for drop test of mobile phone, PDA and other electric products. Technical specifications Rolling drum number 2set Allowed sample weight 5kg(max) Drop height 500mm + 1000mm …

Model: DL-150 Standards: GB/T4857.5-92, ISO 2248, JISZO 202-87 Description The pneumatic drop test machine is used for drop test of heavy package. Technical Specifications Height Display: LED Power Supply: AC380V 50HZ Total Power: 1000W Drop Height: 331-1500mm Max Test Height: …

    Model: DL-60D Standards: ISO 2248, JIS Z0202-87, GB/T4857.5-92 Description This tester is used to simulate the sudden accident impact on package during transportation, it can test the edge, angle, plane. Electromagnetic control. It’s kind of common package testing …

Model: HTD-8040/8040D Description The HTHP Consistometer is specially used to test the oil-well cement thickening time, also this equipment can make specimen for test of cement paste, viscosity, water loss, rheology. Features MCU control Temperature digital display Programmable temperature control, suitable …

Model: HTD-7720 Features Comply to the API requirements Digital intelligent controller, temperature digital display Autoclave body made of special alloy Max pressure up to 20000PSI, 137Mpa Temperature up to 204 degree C(400 Fahrenheit) Solid & durable in use Large power heater …

Model: PHS-25 Description Portable type PH meter, LCD display, can indicate PH, temperature. It can measure the water PH and potential value, if has ORP electrode can measure the ORP value, if has ion selection electrode, can measure the electrode …

  Model: UTM-2000 Technical specifications Max testing force 2000 kN Load range 40-2000KN Testing accuracy ±1% Max tension test space 900mm Max compression test space 800mm Flat sample clamping thickness 0-60mm Round sample clamping diameter Φ15-70mm Compression platen diameter 204*204 …

Model: DL-5 Standards: JIS C 0044 IEC 60068-2-32 Description This drop testing machine is suitable for drop test of general electric products, such cell phone, PDA, MP3 etc. Features     Electric test height adjustment Multi-angle device suitable for test of …

Model: DL-60 Standards: ：GB/T4857.5-92，ISO2248，JISZO202-87 Description The single beam drop testing machine is used to simulate the drop status during transportation conditions thus to test the package strength, it’s kind of common package testing equipment. Features   Single beam drop Baseplate is …

  Features Single chip control, PID adjustment, imported Pt resistance, high temperature control accuracy, less fluctuation; Quality compressor, high efficiency fast temperature fall, full sealed stirring motor, low noise Large screen backlight LCD, high definition display Thermocouple broken protection, thermostatic …

  Model: SY-261C Standards GB/T 261, ASTM D 93, ISO 2719 Description This instrument is used to determine the flash point of petroleum products in the temperature range from 40℃to 300℃ by Pensky-Martens Closed-Cup method, it’s kind of common petroleum …

Model: 85-2 Description Uses quality DC motor, less noise, smooth speed regulation, full-sealed type heater as auxiliary heating use. Can set temperature, have temperature display, can heat in long time, the stirrer is made of PTFE and quality magnetic steel, …